K&B Formwork Technology 1:50

For your Info!

The formwork and the accessories are 3D printed, due to production,

so it can happen that some parts do not sit properly or can fall off!

It should be noted that the stability when assembling the formwork and the alignment can only be guaranteed to a limited extent! Depending on the use of the formwork, the use of glue is recommended.

Multi T 24 Girder Wall Formwork

Multi T 24 Girder Wall Formwork, single panels

T 24 Girder Wall Formwork System. h=72mm,

Printed from PLA, coated with plywood (like the original) Ready to use!

Formwork, also suitable as a load for trucks

Size: 72*50mm and, 72*25mm

Extra Parts: Brackets, Struts, Scaffolding consoles

3,75 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Starter-Set T 24 Girder Wall Formwork System

Inkluding:

8 Panels, 72*50mm (360*250cm)

2 Panels, 72*25mm (360*125xm)

Inkl. 10x struts, brackets...

Printed from PLA, coated with plywood (like the original) Ready to use!

49,00 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Multi T 24 Girder Wall Formwork, single panels

T 24 Girder Wall Formwork System. h=72mm,

Printed from PLA, coated with plywood (like the original) Ready to use!

Formwork, also suitable as a load for trucks

Size: 120*50mm, 72*50mm, 72*25mm

4,50 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Set of Struts

4+4 Struts in 2 different Sizes

printed from PLA

4,50 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Scaffolding consoles + wood planks

14 Scaffolding consoles + wood planks

Printed from PLA, coated with plywood (like the original) Ready to use!

14,00 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Set Connecting Parts T24

Set Connecting Parts 4/4

To connect the Formwork Panels together

printed from PLA

1,75 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

guide beam 2h T24

2x guide beam 2h

for aligning the formwork vertikal!

printed from PLA

4,50 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

transport clamps T24

2 transport clamps to set up the T24 Formwork by crane

Printed from PLA

2,50 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Panel Formwork System

Panel Formwork Sets, available in 3 different sizes

Panel Formwork (similar to Peri, Doka) The specified dimensions are the original formwork dimensions, scaled to 1:50!

Printed from PLA, coated with plywood (like the original) Ready to use!

--Set 1, 12 parts: 2x 24*48mm, 2x 24 * 24mm, 2x 24 * 18mm, 2x 24 * 14.4mm, 2x 24 * 12mm, 2x24 * 9mm, without accessories!

--Set 2, 26 parts: 10x 54 * 48mm, 4x 54 * 24mm, 2x 54 * 18mm, 2x 54 * 14.4mm, 2x 54 * 12mm, 2x 54 * 6mm, 2x corners 54 * 6mm, 1x set of brackets

--Set 3, 36 pieces: 10x 54 * 48mm, 4x 54 * 24mm, 2x 54 * 18mm, 2x 54 * 14.4mm, 2x 54 * 12mm, 2x 54 * 6mm, 2x 24 * 24mm, 2x 24 * 18mm, 2x 24 * 14.4mm, 2x 24 * 12mm, 2x24 * 9mm, 2x corners 54 * 6mm, 1x set of clamps

Set 1 and 2, incl. all brackets, angle supports, 2x hooks and a chain sling for 2, for instand assembly!

26,00 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Panel Formwork, single Panels, big size

Panel Formwork, size. h=54mm

Printed from PLA, coated with plywood (like the original) Ready to use!

54*48mm, 54*24mm, 54*18mm, 54*14,4mm, 54*12mm, 54*9mm, 54*6mm, 54*6mm Außenecke, 54*6mm Innenecke

(Transport racks, further down on the page!)

2,30 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Panel Formwork, single Panels, small size

Panel Formwork, h=24mm

Printed from PLA, coated with plywood (like the original) Ready to use!

24*48mm, 24*24mm, 24*18mm, 24*14,4mm, 24*12mm, 24*9mm, 24*6mm,

2,25 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Parts for Panel Formworks

Brackets, bolts, struts, Corner ledger (last picture) For column formwork and corner formwork! This means that the formwork can be set up and converted in various sizes and shapes!

Moving hook, for moving the formwork by crane!

Printed from PLA, ready to use !

5,75 €

Endpreis, zzgl. Versandkosten¹

verfügbar
10 - 21 Tage Lieferzeit

Brace Frame for single-sided walls

Brace Frame for single-sided walls. Perfect when concrete has to be poured against the construction pit wall or the wall is to be created on an adjacent structure without tensioning through it. Can be expanded as required and is suitable for a height of two panels. Plates can simply be clicked on. Incl. Transport Frame when you buy 8 pieces!

Printed from PLA, ready to use !