K&B Trench Shoring System 1:50

Trench shoring, box, printed from PLA, ready to use

Height of the box = 5cm (2.5m), length of the shoring panels selectable! 4cm (2m) to 9cm (4.5m)

The shoring box is designed as a plug-in system and can be easily adjusted in width with spacers.

Included are: spacers in 4 different lengths and a 2-string chain hanger 6cm (3m)

Trench shoring, box, printed from PLA, ready to use

This raises the shoring box so that it can go down deeper

Height of the box = 3cm (1.5m), length of the shoring panels selectable! 4cm (2m) to 9cm (4.5m)

The shoring box is designed as a plug-in system and can be easily adjusted in width with spacers.

Included are: spacers in 4 different lengths and a 2-string chain hanger 6cm (3m)

Slide rail shoring with single rail, printed from PLA, ready to use

Assemble your shoring together in the size you want it to be!

Simply select the number of slide rails as required and order the plate sets (4 pieces each) accordingly.

Height of the rail = 8cm (5m), size of the shoring panels = 7x5cm (3.5x2.5m)

The shoring is designed as a plug-in system and can be easily changed in width with spacers.

The Sliding Rail Includes: 2 spacers in 4 sizes and 1x 2-string chain hanger 4cm, every 8th sliding rail!

The shoring is designed as a tongue and groove system, as in the original, which ensures a secure hold in the rail!

Slide rail shoring with double rail, printed from PLA, ready to use

Assemble your shoring together in the size you want it to be!

Simply select the number of slide rails as required and order the plate sets (4 pieces each) accordingly.

Height of the rail = 8cm (5m), size of the shoring panels = 7x5cm (3.5x2.5m)

The shoring is designed as a plug-in system and can be easily changed in width with spacers.

The Sliding Rail Includes: 2 spacers in 4 sizes and 1x 2-string chain hanger 4cm, every 8th sliding rail!

The shoring is designed as a tongue and groove system, as in the original, which ensures a secure hold in the rail!

Trench shoring system, with 1x (Big Space) Printed from PLA

Spezial Trench shoring system for Pipes with bigger diameter and big building parts

Assemble your shoring together in the size you want it to be!

Simply select the number of slide rails as required and order the plate sets (4 pieces each) accordingly.

Height of the rail = 10cm (5m), size of the shoring panels = 7x5cm (3.5x2.5m)

The shoring is designed as a plug-in system and can be easily changed in width with spacers.

The Sliding Rail Includes: 4 spacers in 4 sizes and 1x 2-string chain hanger 4cm, every 8th sliding rail!

The shoring is designed as a tongue and groove system, as in the original, which ensures a secure hold in the rail!

Angleslide as the endpeace of the trench shoring

Printed from PLA

Hight = 8, oder 10cm (4/5m)